9mm - +P 124 Grain JHP - Speer Gold Dot - 1000 Rounds in Ammo Can

Name: 9mm - +P 124 Grain JHP - Speer Gold Dot - 1000 Rounds in Ammo Can
Brand: Speer
Price: 645 USD
Availability: OutOfStock

Go to previous image Go to next image

Out of stock

Overview

Quantity - 1,000 rounds per ammo can
Manufacturer - Speer
Bullets - 124 grain jacketed hollow point (JHP)
Casings - Boxer-primed nickel-plated brass

Product Type	Ammo
Manufacturer	Speer
Condition	New
Bullet Weight	124 Grain
Bullet Type	Jacketed Hollow-Point (JHP)
Ammo Casing	Nickel-Plated Brass
Quantity	1,000
Ammo Caliber	9mm Luger (9x19)
Pressure	+P
Manufacturer SKU	53617
Primer Type	Boxer
Muzzle Velocity (fps)	1220
Muzzle Energy (ft lbs)	410
Attracts Magnet	No
UPC Barcode	R060420206377

Use Type

Self Defense

See More Information

Speer didn’t waste a second during the record-breaking surge in demand following the pandemic scare. The great Idahoan manufacturer was so ambitious, as a matter of fact, that they made far more ammo than they could ever hope to package. That means this 9mm +P Gold Dot ammo is not only freshly minted, but furthermore identical to what you would get at a retail store.

Well, not strictly identical – it is at a reduced priced.

Speer’s Gold Dot bullet is carefully engineered for self-defense. This 9mm +P cartridge’s 124 grain bullet features an electrochemically bonded jacket. As the result it is not only perfectly balanced, but also essentially incapable of tearing apart during penetration of barriers and the target itself. The Gold Dot bullet’s hollow point nose cavity isn’t simply drilled out, but rather precision formed via consecutive die presses. This bullet is literally programmed to expand to the same width and at the same rate over a wide range of velocities.

So high tech a bullet only performs better in conjunction with a nickel plated brass shell casing, which is inherently better able to feed, extract, resist corrosion, and be seen in the dark. These rounds’ CCI primers are the paragon of reliability, and their propellant burns clean to promise a consistent 1,220 fps muzzle velocity (out of a 4” barrel).

This ammo is loose-packed in a new mil-spec steel ammo can. Even without its ammo the can would make a fine addition to any arsenal, ideal for long-term storage and safe transportation to and from the range.

Do note that this is +P ammo. Nearly any modern 9mm handgun can handle a +P load’s added chamber pressure, Glocks included. We still advise you to make sure your weapon is up for +P pressure ammo before putting it to the test!

Questions & Answers

Ask a Question Our customer service team has published this Q&A information as a free service to the shooting community. Please note that LuckyGunner.com expressly disclaims any and all liability with regard to how the shooting community might use this Q&A information. See Terms of Use for more details.

Q: I have a Glock 19x, Sig P226 & P229 legion

Posted On: 6/7/2020 By: Reynaldo Sanchez

A: Any of Glock's 9mm handguns should run overpressure ammo like this just fine. Same goes for SIG, who say "+P Ammo manufactured to SAAMI/CIP/NATO specs is fine to use as a defensive round or for occasional range use." All three of your handguns will function correctly with this ammo, with the obvious caveat that overpressure ammo would wear them out quicker if you fired it a lot.

Q: In order to shoot +p ammo, does your barrel need to be rated for +p?

Posted On: 6/7/2020 By: Reynaldo Sanchez

A: Hello Reynaldo! If a handgun is rated to fire overpressure (+P) ammunition, it will often say so on its barrel. It's actually its chamber that has to be designed to handle that extra pressure though. Most modern 9mm handguns can handle +P, including Glocks. Your firearm's operator's manual will likely indicate whether it can handle +P ammo. If you post another comment with your make and model I can take a look for you as well!

*Name

This will be displayed next to your question.

*Email

This is where you will receive the answer to your question. Your email address will be kept private and only used to answer your question.
*Question